LUNAMAR SHIPYARD MOON Rigid Inflatable Boats RIBs Technical Specifications

STRONGAT FABRIC
Exclusive of MOON

1100 Nontearing - MOON RIBs exclusive polyester base

Maximum resistance to extreme cold, sudden
changes of termperature, ice, UVA rays, etc.

"The quality of our Strongat weave and MOON RIBs are in constant proof by the use in areas with extreme weathers and conditions such as The Antartic, Extreme south of the American Continent, etc."

MOON RIBs	TOURISM LINE --------
MOON RIBs	ROLL 260	ROLL 310	310 Aux	440 T	560 Tourism	560 Sport	630 Patagon	760 Sport
Passengers	4	4	4	6	8	8	12	15
Max. Payload	350 KG	400 KG	400 KG	700 KG	890 KG	890 KG	1350 KG	2000 KG
MEASURES
Length	2.60 m	3.10 m	3.10 m	4.45 m	5.60 m	5.60 m	6.30 m	7.60 m
Beam	1.60 m	1.60 m	1.60 m	2.30 m	2.40 m	2.40 m	2.70 m	3.00 m
Max. Interior Length	1.80 m	2.30 m	2.30 m	3.40 m	4.60 m	4.60 m	5.30 m	6.60 m
Max. Interior Beam	0.78 m	0.78 m	0.78 m	1.30 m	1.47 m	1.47 m	1.50 m	1.90 m
Rear Tubes Diameter	0.430 m	0.43 m	0.43 m	0.50 m	0.54 m	0.54 m	0.60 m	0.68 m
# AIR CHAMBERS	2	2	2	3	3 opc. 5	3 opc. 5	3 opc. 5	5 opc. 7
MOTOR	OUT-B	OUT-B	OUT-B	OUT-B	OUT-B	OUT-B	OUT-B	OUT B - INT
Power	Up to 5 hp	Up to 8 hp	Up to 15 HP	Up to 60 HP	Up to 90 HP	Up to 90 HP	Up to 150 hp	Up to 250 HP
Shaft	short	short	short	short optional long	long optional short	long optional short	long	long leg
BOTTOM TYPES	foldable roll up	foldable roll up	FGRPC V-shaped	FGRPC V-shaped 3 baffles x band	FGRPC V-shaped 3 baffles x band	FGRPC V-shaped 3 baffles x band	FGRPC V-shaped 3 baffles x band	FGRPC deep V-shaped 3 baffles x band with step
DECK TYPE			moulded	moulded	moulded	moulded	moulded	moulded
TUBE TYPES	conical	conical	conical	conical	conical	conical	conical	conical
Design Category	D	D	C	C	C	C	C	B

MOON RIBs	WORK LINE -----------
MOON RIBs	560 Heavy Duty	630 Heavy Duty	W 900 e Interceptor	W 1040 e Interceptor	W 1190 e Interceptor	W 1470 e Interceptor	1470, 1600, 1900 y 2200 WIDE
Passengers	8	12	22	31	35	40
Max. Payload	890 KG	1350 KG	4000 KG	4500 KG	5000 KG	5500 KG
MEASURES
Length	5.60 m	6.30 m	9.00 m	10.40 m	11.90 m	14.70 m	14.70, 16, 19 or 22 m
Beam	2.40 m	2.70 m	3.20 m	3.60 m	3.70 m	3.90 m
Max. Interior Length	4.60 m	5.30 m	7.50 m	8.95 m	10.40 m	13.20 m
Max. Interior Beam	1.47 m	1.50 m	1.90 m	2.30 m	2.40 m	2.60 m
Rear Tubes Diameter	0.54 m	0.60 m	0.72 m	0.75 m	0.87 m	0.92 m
# AIR CHAMBERS	3 opc. 5	3 opc. 5	5 opc. 7	5 opc. 7	5 opc. 7	5 opc. 7
MOTOR	OUTBOARD	1 or 2 OUTBOARD	1 o 2 OUT B - INT	1 o 2 OUT B - INT	1 to 3 OUT B - INT	1 to 3 OUT B - INT
Power	up to 90 HP	up to 150 hp
Shaft	Long optional Short	long	long-ext leg	long-ext leg	long-ext leg	long-ext leg
BOTTOM TYPES	FGRPC V-shaped 3 baffles x band	FGRPC V-shaped 3 baffles x band	FGRPC deep V	FGRPC deep V with step	FGRPC deep V with step	FGRPC deep V with step	FGRPC deep V
DECK TYPE	moulded	moulded	open or cabin	open or cabin	open or cabin	open or cabin	open or cabin
TUBE TYPES	conical	conical	conical	conical	conical	conical	conical
Design Category	C	C	B	B	B	B	A

STRONGAT SPECIFICATION	VALUE	VALUE	TEST METHOD UNDER REGULATIONS
WEIGHT	Base material 280 gr./m2 TOTAL. 1000 gr./m2	Base material 440 gr./m2 TOTAL. 1500 gr./m2	IRAM 7508
MANUFACTURE	POLYESTER 1100 DTEX 12 x11	POLYESTER 1100 DTEX 18 x16 military line	-----------
THICKNESS	850 610 6pm.	1250 610 pm.	-----------
TENSILE STRENGTH	WARP. 80 62 kg./cm2 WEFT. 68 62 kg./cm2	WARP. 100 62 kg./cm2 WEFT. 90 62 kg./cm2	ISO 1421
ELONGATION	WARP. 18 61 % WEFT. 30 612%	WARP. 17 61 % WEFT. 32 61%	ISO 1421
TEAR STRENGTH	WARP. 15 61 kgf WEFT. 25 62 kgf	WARP. 85 62 kgf WEFT. 70 62 kgf	ISO 4674
ADHERENCE TO THE BASE MATERIAL	2.50 kg./cm	3.50 kg./cm	ISO 2411
BRITTLENESS TEMPERATURE	-18	-18	IRAM 7577
PLASTICIZER LOSS	MAXIMUM 8	MAXIMUM 8	IRAM-FAL-7574
DOUGH LOSS	DOES NOT BREAK	DOES NOT BREAK	IRAM 7575
ABRASION10 RESISTANCE	DOES NOT EXPOSE THE BASE MATERIAL	DOES NOT EXPOSE THE BASE MATERIAL	IRAM 7575
DEGREE OF GELATION	WITHOUT ALTERATION	WITHOUT ALTERATION	IRAM 7550
WATERTIGHTNESS	MINIMUM 60	MINIMUM 60	IRAM 7547

TECHNICAL SPECIFICATIONS MOON RIBs